1.1.78 - Released March 8, 2013 ChangeLog Version 1.1.78. Version 1.1.78-pre28. 10M bit files Version 1.1.78-pre27. Enable FIZ device support in NetCamXLS builds. Version 1.1.78-pre26. Remove "Low Light Presets" from Image configuration help page. ...

1.1.75 - Released August 3, 2012 ChangeLog Version 1.1.75. Version 1.1.75-pre14. bit files for the "final" pre Version 1.1.75-pre13. new bit file with different reset logic for video out Version 1.1.75-pre12. stardot: Move hardware reset during device...

1.1.73 - Released April 6, 2012 ChangeLog Version 1.1.74. Version 1.1.74-pre5. 1.1.74 bit files Version 1.1.74-pre4. new bit file for a pre 74 Version 1.1.74-pre3. NetCamSCM: Allow larger values for "mx_shift". need pre for monochrome ...

1.1.73 - Released April 6, 2012 ChangeLog Version 1.1.73. Version 1.1.73-pre23. stardot: Add "measurment (mx) mode" configuration registers. "final" bit file stardot: Remove unused IMAGETYPE_XXX equates. stardot: Remove use of internal "imagetype" value. ...

1.1.72 - Released October 31, 2011 ChangeLog Version 1.1.72. Version 1.1.72-pre25. 5M product bit files for 1.1.72 Version 1.1.72-pre24. SCX 10M stardot: Return current RGB white balance values from device config node. stardot: Add overlay markup for...

1.1.71 - Released March 28, 2011 ChangeLog Version 1.1.71. Version 1.1.71-pre40. 10M bit Version 1.1.71-pre39. dome 10M bit file? Version 1.1.71-pre38. new pre bit files for testing reboot Version 1.1.71-pre37. resolution list fix for 1.3M ...

1.1.70 - Released October 8, 2010 ChangeLog Version 1.1.70. Version 1.1.70-pre1-dome-fixes-2. Update firmware for NetCamSC device ID 6: last one. Update firmware for NetCamSCD device ID 9. Version 1.1.70-pre1-dome-fixes-1. Update firmware for NetCamSCD device...

1.1.69 - Released September 9, 2010 ChangeLog Version 1.1.69. Update firmware for ExpressXL device ID 9. Remove Panasonic 1.3MP sensor firmware. Update firmware for NetCamSC device ID 6 and NetCamSCD device ID 1 and 9. Revert to previous revision of bit files for...

1.1.68 - Released July 13, 2010 ChangeLog Version 1.1.68. h264: Fix typo in HTTP multipart timestamp header. h264: Remove unused XFPGA_EXPANSION expansion card firmware loading code. New firmware from Dan (Tue, 15 Jun 2010 15:19:11). h264: Remove unused variable. ...

1.1.67 - Released April 6, 2010 ChangeLog Version 1.1.67. New SC Defaults. h264: Add "h264_http", specifying port/protocol for HTTP H.264 stream access, to info.cgi. Merge various HTML tables so that the header bar for the configuration pages resizes based on the size of...

1.1.66 - Released February 22, 2010 ChangeLog Version 1.1.66. h264: Show stream frame sizes in bytes (not bytes divided by 4), and add "total sequence" size in bytes on End-Of-Sequence (EOS) interrupt. Remove h264 "expansion card" log messages from StarDot video driver. ...

1.1.65 - Released November 6, 2009 ChangeLog Version 1.1.65. Update info.cgi to show "relay", and use correct values for "external_inputs" and "external_outputs" for various products. New bitware (Thu, 29 Oct 2009 23:08:40). New bitware (Tue, 27 Oct 2009 23:48:08): new...

1.1.63 - Released March 10, 2009 ChangeLog Version 1.1.63. Restore Zeroconf IP address configuration. Add CONFIG_STARDOT_VIDEO_STARDOT_H 264 configuration option, and default to disabled. Add top-level Makefile "force_config" target for automated builds. Web pages...